Ransburg Vector_Solo Technical Manual - Manual (Page 4)

Before operating, maintaining, or servicing any Ransburg electrostatic coating system, read and un-
derstand all of the technical and safety literature provided with Ransburg products. If you do not have
the manuals and safety literature for your Ransburg system, contact your Ransburg representative.
USE THE RIGHT TECHNIQUES
Vector/Solo (Electrostatic) Applicators
Savings of 25% to 50% in paint is possible when you replace conventional air spray with Ransburg
Electrostatic Applicators. You finish curved and recessed surfaces uniformly in fewer passes, because
combined air and electrostatic forces literally follow the shape of the work surface. Bounce losses
from work are reduced by the electrostatic attraction, when proper techniques are used.
The following describes basic electrostatic spray techniques. Depending on the type of work being
sprayed, it may be necessary to change the technique slightly.
Vector/Solo Applicators Spray Techniques
1
Ransburg
IL-246-C