Ransburg Evolver 303 Dual Purge Solvent Robotic Applicator A12374-XXX - Manual (Page 39)

34
Evolver 303 Dual Purge Robotic Atomizers - Maintenance
Item #
SPRAY HEAD ASSEMBLY - PARTS LIST (Figure 13b)
Part # Description Qty
1 79148-00 End Cap, Spray Head 1
2 17615-00 Spring, Compression 1
3 9334-00 Spring, Valve Return 1
4 7733-07 Jam Nut 1
5 76199-00 Rear Adjusting Nut 1
6 79151-00 Assembly, Needle Shaft 1
27 RME-38 Return Spring, Piston 1
28 EMF-7 Seal, Washer 1
29 RME-32 Seal 1
30 79001-01 O-Ring, Solvent Proof 1
31 70430-01 Electrode, High Wear 1
32 EMF-195 Nozzle, Fluid Hole 1
33 EMF-192 Locator, Air Cap 1
34 79140-02 Fluid Tip, .055" (1.4mm) Diameter 1
35 79153-65R-1 Air Cap, Pined 1
36 79154-00 Retaining Ring, Tapered 1
> Ensure that the fan and atomization air
are on and flowing prior to triggering the
fluid. Ensure air before fluid adjustment is
correct. Failure to follow this sequence will
cause spits and defects on the part being
painted.
NOTE
AA-08-01.1