Ransburg Serial Analog Module A11012 - Manual (Page 13)

LN-9258-07.2
Serial Analog Module - Installation
TOP ASSEMBLY
Figure 4: Top Assembly
10
> When removing and replacing electronic
components such as the control modules
in Ransburg systems, it is extremely impor-
tant that the power to the rack is off. The
electronic components can be damaged if
the cards are unplugged or installed with
power on the rack.
C A U T I O N
!
> When removing and replacing electronic
components such as the control modules in
Ransburg systems, it is extremely important
that antistatic precautions be observed. Anti-
static bags must be used to store boards
when not in use. Personnel working with
these cards must be free of any static charge
and must be grounded to prevent buildup
of charge. Equipment used for installation
or removal of the cards must be grounded
or be rated as anti-static type material. The
electronic components can be damaged if
subjected to stray static charges.
C A U T I O N
!