Ransburg DR-1 Plastic Fluid Regulator 75902 - Manual (Page 8)

INTRODUCTION
DR-1 Plastic Fluid Regulator - Introduction
5
SPECIFICATIONS
Air Pressures: Variable by Control
(Manual or Automatic)
Fluid Input: 100 psi (6.8 bar max.)
(10 psi minimum above
output pressure)
Fluid Output: Variable by Ratio
Pneumatic / Fluid Connections
Air Pilot: 10-32 x 3/16-inch OD
Tube
(Low & High)
Fluid In: Model A: 1/4-inch OD
Tube
Model B: 1/4-inch OD
Tube, Nut & Ferrule
Fluid Out: 1/8-inch NPT
Volume of Paint
Held Within
Regulator: 5 cc
Mechanical
Height w/fittings: Model B: 3-inches
Diameter: 3-3/4-inches w/fittings
Environmental / Physical
FEATURES
• Two independently controlled flow pressure
ranges.
• High flow range port for higher fluid deliveries.
• Low flow range for more precise control over
lower fluid deliveries.
• Interchangeable low flow ratios (1:1, 1:2, 1:3,
1:4, 1:6, 1:8, 1:10) for precise control.
• Plastic and coated wetted parts for
decreased color change time.
• Factory Mutual listed in conjunction with the
Aerobell 33 TM .
LN-9228-00.3