Ransburg MCV2 Modular Color Changer A10800-XX_A11077-XX - Manual (Page 22)

OPERATION
MCV 2 Collet Series Color Changer - Operation
17
OPERATING
Modules may be added or removed from the as-
sembly as desired; the user need only purchase the
appropriately sized changer. If, for instance, the num-
ber of required materials increases, the changer can
be expanded by adding more modules. Also, each
module can be individually serviced. Recommended
for use with waterborne or solventborne paints.
Figure 5a shows “Typical Color Changer Schematics”
to prevent back flow of material. Figure 5b shows
“Typical Bell Wash or Stack Purge Flow Schematics.
Figure 5a: Color Changer Schematics
Solvent
Color 1 In
Main Air
Flow Meter
Fluid
Regulator
MCV Color Selector
Spray
Device
Color 1 OUT Color 2 In Color 2 OUT
Figure 5b: Typical Bell Wash or Stack Purge Flow Sche-
matics
CS-02-01.10