Audiovox Prestige P959ESP User Manual
Page 14
128-6979
14 of 20
-14-
em
TRACK REPEAT PLAY SELECTOR (RPT)
When the RPT button is momentarily pressed, the RPT indication will replace the CDC indication on the display panel and play of the current track
will be continually repeated until the Track Repeat mode is canceled by pressing the RPT button again or by activating the Track Select, Random
Play or Scan
functions.
When the RPT button is pressed and held for more than 2 seconds, the disc repeat mode is activated; DRT will appear on the display and the play
of the current disc will be continuously repeated. This mode is canceled in the same manner as before.
en
SHUFFLE PLAY SELECTOR (SHF)
When the SHF button is momentarily pressed, the SHF indication will replace the CDC indication on the display panel and the tracks on the disc
will be played in a random, shuffled order. The Track Select buttons
dt
will also select tracks in the shuffled order instead of the normal
progression. The Track Shuffle mode can be canceled by pressing the SHF button again or by activating the Track Select, Repeat Play
or Scan
functions.
When the SHF button is pressed and held for more than 2 seconds, the disc shuffle mode is activated; DSF will appear on the display and the play
of the discs in the magazine will be played in a random shuffled order. This mode is canceled in the same manner as before.
CD CH
CD CH
CD CH
CD CH
CD CH A
A
A
A
A NGER ERR
NGER ERR
NGER ERR
NGER ERR
NGER ERROR CODES
OR CODES
OR CODES
OR CODES
OR CODES
If a problem should develop while operating the CD changer, the error code “Err” may appear on the display panel.
This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor
control of the changer. If the error code should appear, try ejecting and re-loading the magazine into the changer.
While the magazine is out of the changer, make sure the discs are clean, undamaged, and loaded correctly (see
Owner’s Manual of the CD changer). You may also try activating the RESET button
dn
on the unit, but this will also
erase the time and pre-set memories.
If the suggested measures do not solve the problem, contact an approved warranty station near you for further
assistance.