Reese 94621 GOOSE BOX - Manual (Page 5)

2009 Cequent Performance Products, Inc Sheet 5 of 7 94621IN 3/6/2012 Rev. C
Form: F205 Rev A 5-6-05
Installation / Owners Manual
Goose Box
WARNING:
Unstable or improperly hitched trailers can fall or separate and cause serious injury or death:
Never attempt to hitch trailer without first reading and following all instructions in the manual provided
with this product. Do not use without reading and understanding the manual.
Never tow a trailer that exceeds rated capacity. Towing a trailer that exceeds rated capacity can result in
trailer separation, serious injury, or death.
Never allow any part of the body to be placed under the trailer or between the truck and trailer.
The combined weight of the trailer and its contents must not exceed the lowest truck, hitch, and/or trailer
tow rating. Keep hands clear when operating coupler mechanism.
HOOKING-UP:
1. Use only with 2 5/16” dia. Gooseneck Ball.
2. Ensure coupler handle is in the full forward position and not limited by the pull cable. (Figure 10)
3. Lower coupler onto gooseneck ball. Handle will open, then snap shut.
4. Make certain handle has returned forward and is in the locked position before towing.
UNHOOKING:
1. Using pull cable, pull handle back and hook cable into stop. (Figure 11) Handle should be in the Un-Locked position.
2. Note: If necessary you can adjust the cable stop by loosening the small set screw, moving stop, and then retightening.
3. Raise trailer off of gooseneck ball, then release cable. (Figure 10)
4. Ensure latch remains in locked position.
Figure 10
Figure 11
Pull Cable Handle
Adjustable Cable Stop
Handle In Locked
Position
Pull Cable Hooked
In Cable Stop
Handle In Un-Locked
Position