Robertshaw SlimZone Deluxe ZONE CONTROL SYSTEM User Manual

Page 5

Advertising
background image

1. INTRODUCTION

The Robertshaw Slimzone Deluxe logic panel is designed for residential and light commercial
constant volume heating and air conditioning zone control applications. The Deluxe panel
incorporates a solid-state, microprocessor based logic board containing dedicated wiring
terminals for interface with a single piece of heating and cooling equipment, zone thermo-
stats, motorized zone dampers, and a wide range of optional peripheral devices.

The Slimzone Deluxe (2701-002) will control up to 3 individual zones and can be expanded
to 7 zones in increments of two using Slimzone Deluxe Expander Modules (2701-003).

2. OPERATIONAL FEATURES

Controls gas, oil, electric, add-on heat pump (duo fuel), or heat pump equipment

Controls up to 2 stages of heating and 2 stages of cooling for heat/cool equipment

Controls up to 3 stages of heating and 2 stages of cooling for heat pumps

First call priority – timeshare control algorithm

Switch selectable:

- Time or numerical zone upstaging
- Time upstage delay of 5, 10, 15, or 20 minutes
- 45 second fan purge
- Heat pump auxiliary heat upstage of 5, 10, or 20 minutes
- G2 fan based on number of zones
- G2 fan based on number of stages
- Intermittent or continuous fan operation
- Economizer power terminal using G2
- On-board heat/auto/cool mode with dedicated terminals for external selector switch
- On-board emergency heat with dedicated terminals for external SPST switch
- Equipment switch (heat/cool, heat pump, add-on heat pump)
- Plenum fan

Computer controlled minimum on/off time delays to prevent equipment short cycling

On-board time delay override button for test, check, and startup

Dedicated terminals for:

- Each 4 or 5 wire single stage zone thermostat
- Independent power of each 2 or 3 wire motorized zone damper
- Logic panel power
- Ground (one only)
- Zone damper power
- High/low limit down staging
- High/low balance point control
- Occupied/unoccupied system scheduling clock
- Smoke detector input

LED (light emitting diode) indication for:

- All system outputs
- 24 volt power
- When off time delay is active
- Confirming normal operation

Outputs are recoverable fuse protected (poly-switches)

Ambient operating temperature range of 14˚ to 158˚ F (-10˚ to 70˚ C)

SlimZone Deluxe

1

Advertising