Operating instructions – Robinair 17580 Air Conditioning Component Flusher User Manual

Page 7

Advertising
background image

Model 17580 Air Conditioning Component Flusher

5

WARNING!

To prevent eye injury, do not look into a component to observe airflow even while wearing

protective goggles.

Operating Instructions

Use the following steps to operate the flusher:
1. Turn the selection valve on the control panel to the OFF position.
2. Ground the flusher to the vehicle by attaching the ground clamp to the

negative battery terminal or other source of ground on the vehicle.

3. Add one gallon of flush solvent to the fill port.
4. Connect shop air to the unit’s air inlet (80–150 psi).
5. Install A/C component flush adapters as required to the vehicle A/C

components to be flushed. Connect the flusher discharge hose to the inlet
/ outlet of the component being flushed.

Recommended Flush/Backflush Procedure:

When flushing a condenser and/or high pressure liquid lines, flush from
the outlet end of unit first; then backflush in the opposite direction.

When flushing an evaporator, flush from the inlet side of the unit to the
outlet first; then backflush in the opposite direction.

This sequencing will ensure the maximum flushing action is obtained.
Solvent purges from the system faster after the flushing operations are
completed.

6. Connect the return hose to the remaining adapter.

CAUTION:

To prevent an

electrical shock

or an explosion,

ground the flusher

to the vehicle

before use by

attaching the

ground clamp

to the negative

battery terminal

or other source

of ground on the

vehicle.

Avoid solvent

spillage on painted

areas. Solvents

can peel paint from

a vehicle. Read

all warnings on

solvent containers.

This manual contains important safety procedures concerning the operation, use, and

maintenance of this product. Failure to follow the instructions contained in this manual

may result in serious injury. If you are unable to understand any of the contents of this

manual, please bring it to the attention of your supervisor. Do not operate this equipment

unless you have read and understand the contents of this manual.

Operating Instructions

Advertising