Robinair 16293 UV DYE DELIVERY SYSTEM - Manual (Page 2)

CoolTools CoolTools CoolTools CoolTools CoolTools
DOSAGE: Vehicles — One squeeze per A/C system
HVAC — 1 squeeze up to 3 lbs
2 squeezes 3.1 to 5 lbs
3 squeezes 5.1 to 10 lbs
4 squeezes 10.1 to 25 lbs
If the A/C system required additional oil due to line length,
inject dye at a total ratio of 1 squeeze for every 16 oz. of
system oil.
Problem: Ratchet does not catch when gun handle is
squeezed.
Cause: Air was not purged from hose.
Problem: Ratchet catches and plunger advances, but
dye leaks out the back of the cartridge.
Cause: Dye path plugged.
1. System valve may not be open.
2. Hose may be connected to high side.
3. User may be attempting to inject dye into
an R-410A system.
4. A/C system is not running.
Problem: The A/C system sucked all the dye out of the
cartridge.
Cause: A/C system is in vacuum.
TROUBLESHOOTING
123573 (Rev. B, 05/19/03) UV Dye Delivery Instruction © SPX Corporation
When purging a new hose it
should be held in a vertical
fashion, as shown.
R-12 Dye Injector
R-12 & R-134a Dye Injector
SPX Corporation
655 Eisenhower Drive
Owatonna, MN 55060-0995 USA
Technical Services: 1-800-822-5561
Fax: 1-800-822-7805
Customer Service: 1-800-533-6127
Fax: 1-800-322-2890
Web Site: www.robinair. com