Specifications, Installing/replacing batteries, Replacement parts – Robinair 16600 Electronic Leak Detector User Manual

Page 7: Maintenance

Advertising
background image

1

© 2000 Robinair, SPX Corporation

6

Specifications

Power Supply .............................................................. 4 “AA” alkaline batteries
Sensitivity ..................................................................... Less than

1

/

2

oz. per year

Battery Life ................................................................... Approximately 25 hours
Dimensions ........................................................................ 8

1

/

2

"L x 3

1

/

4

"W x 2"D

............................................................................... (21.59 cm x 8.26 cm x 5 cm)

Probe Length ...................................................................... 16 inches (40.6 CM)
Weight ................................................................. 1.14 lbs. (.52 kg) with batteries

Installing/Replacing Batteries

Your unit uses four (4) “AA” alkaline batteries. The batteries should be replaced
if the top LED (beside the words LOW BATTERY) lights up when the unit is
first turned on. The battery compartment is located on the back of the case.

1. Turn the ON/OFF switch to OFF.

2. Remove the screw holding the battery compartment door. If you are

replacing batteries, remove the old batteries.

3. Place the new batteries in the battery compartment, following polarity

indication.

4. Replace the battery compartment door, and secure the door with the screw.

Replacement Parts

16503

Replacement Sensing Tip

16604

Battery Compartment Door

Maintenance

Advertising