Introduction, Description – Robinair 16455 TruTrack Ultrasonic Leak Detector User Manual

Page 4

Advertising
background image

2

Congratulations on your purchase of the Robinair TruTrack Ultrasonic

Leak Detector, the only ultrasonic instrument specifically designed for air

conditioning and refrigeration leak detection. TruTrack is the ideal tool

for detecting both vacuum and pressure leaks of any refrigerant. Because

this instrument detects sound, it is gas-independent. Even dry nitrogen

leaks can be detected.

The TruTrack Ultrasonic Leak Detector locates leaks in gas-saturated

areas, in windy conditions, and in systems under negative pressure

(vacuum states). It eliminates the need to use tracer gases since it uses

sound waves to locate leaks.

Description

The TruTrack Ultrasonic Leak Detector is a non-invasive detector that

locates both pressure and vacuum leaks. It represents an advanced level

of technology, because it is a listening device that detects ultrasonic

sounds, not chemical refrigerants.

A leak is any unwanted flow of a substance out of a system, or in a

vacuum, into a system. Friction in flow generates sound. For example,

water flowing in pipes creates sound just as air leaking out of a tire. The

sound humans can hear represents less than a third of the total spectrum

of frequencies generated. The sound made by small leaks is mostly

ultrasonic—above the human hearing range.

The TruTrack Ultrasonic Leak Detector “hears” the sound of the

turbulent gases moving through the opening at the leak site and displays

the strength of the sound. The larger the leak, the stronger the indication

on the detector. The detector also produces an audio reproduction of

the leak sound. The intensity of the audio changes proportionally to the

intensity of the leak sound.

Introduction

Advertising