Supplied/required/optional items, Wiring & connections, Tactile sound transducer – Salamander Designs TST239 Tactile Sound Transducer User Manual
Page 4: Kl m
tactile sound transducer
3
www.clarksynthesis.com
Supplied/Required/Optional Items
SUPPLIED PARTS (ILLUSTRATED BELOW)
A. (1) Tactile Sound Transducer
B. (1) Unimount Bracket
C. (1) 3/8"-16 x 3” Hanger Bolt
D. (1) 3/8"-16 x 3” Threaded Stud
E.
(1) 3/8"-16 x 1” Hex Bolt
F.
(4) #12 x 1" Screw
G.
(2) 3/8" Nut
H.
(4) #12 Washer
I.
(4) #12 Lock Washer
J.
(1) 3/8” Lock Washer
• Installation Guide
REQUIRED AUDIO COMPONENTS
• Power amplifier:
...for the TST239, rated between 75 and 125 watts @ 4 ohms.
...for the TST329, TST429, and AW339, rated between 125 and 150 watts @ 4 ohms.
OPTIONAL AUDIO COMPONENTS
• Equalizer to tailor the frequency response of the Transducer(s)
.
K
L
M
REQUIRED TOOLS AND MATERIALS
Depending on your application, you will need
some or all of these tools and materials for
installation:
• #2 Phillips Screwdriver
• (2) 9/16" Open-Ended Wrenches
• Drill
• Saw
• Wire Stripper
• Soldering Gun or Wire Nuts
• Adhesive (construction glue)
• Hardwood (oak, maple, ash, etc., not pine or
softwoods) for creating mounting bridges
• Speaker Cable (min. 16 AWG; 12-14 AWG
recommended)
A
G
H
I
J
D
F
B
C
E
tactile sound transducer
12
www.clarksynthesis.com
K. (1) 3/8” Washer
L.
(1) T-Nut
(1) 3/8"-16 x 1.5” Threaded Stud
M.
Side View
Front View
3-D View
TACTILE AMPLIFIER
AUDIO IN
SURROUND-SOUND PROCESSOR OR RECEIVER
FRONT
CENTER
SUB/LFE
SPLIT TO
EXTERNAL
AMPLIFIER
IF APPLICABLE
OUTPUTS
SURROUND
SPEAKER OUTPUT
EQUALIZER (RECOMMENDED OPTION)
OUTPUT
INPUT
Connecting to the FRONT Outputs of a surround-sound
processor or receiver
• An optional equalizer allows you to tailor the frequency
response of the Transducer.
NOTE: If you are using a
surround-sound receiver
with built-in amplifiers,
you DO NOT need to split
the FRONT output as
shown in this diagram.
1
Connecting to the LFE/SUB Output of a surround-sound
receiver
2
SURROUND-SOUND RECEIVER
SUB/LFE
TACTILE AMPLIFIER
AUDIO IN
SPEAKER OUTPUT
SPLITTER 1
SPLITTER 2
TO INPUT OF
POWERED
SUBWOOFER
Wiring & Connections