SecurityMan SM-804DT - Manual (Page 11)

7
Step 4: Select Yes to complete the Adding Camera process shown below.
NOTE: When adding a camera, press the OK button on the LCDDVR to
confirm the adding camera selection and then immediately press the
“ Pairing” button located on the back of the camera 3 consecutive times
(press, release, press, release, and press and release). There is a 10 second
grace period for adding cameras, if pairing is unsuccessful before the 10
second grace period has expired then an “ Operation Failed” will appear,
repeat steps 1~4. Pairing must be done within 20 ft from the receiver.
Removing camera from SM-371DR/SM-804DR
Step 1: From the Menu options on the receiver select Camera.
Step 2: Select Add/Remove Camera and un-pair it with a LOCK icon
camera (1~4), press OK button.
Step 3: Finally select Yes and then OK button to remove the camera
from the receiver.
NOTE: Please reference DigioutLCD, DigiLCDDVR, and DigiairWatch
user’s manual