SilverStone CW03 - Manual (Page 16)

17
i MON OEM Touch LCD
H/W and S/W Installation Guide
6.Make sure that iMON OEM Touch LCD is matched to secondary monitor with
800*600 resolution in Dual-View mode. IF Touch LCD’s resolution is not
800*600, warning window pops up and advises you to change resolution to
800*600(60Hz)
5.Unless secondary display is enabled, below warning window will be shown.
User cannot use FrontView for 7” Touch LCD but only iMON remote controller.
7.Once FrontView starts to work normally, Touch LCD will show calibration setup
automatically.