SKC 210-1000 Pocket Pump - Manual (Page 27)

25
DataTrac for Pocket Pump Software
With the optional DataTrac for Pocket Pump Software accessory, the Pocket Pump
is programmable using a PC. DataTrac simplifi es chain-of-custody reporting by
allowing users the option of programming a complete running sequence, delayed
start, and timed stop, all at different fl ow rates. Time and sample volume are con-
tinuously updated in memory. There is no need to perform lengthy calculations;
DataTrac does it for you. The advanced information retrieval system is specifi cally
designed to store data and provide chain-of-custody information. Fault features
allow storage of historical data in memory that can be retrieved up to 24 hours
after shutdown.
Features
• Program a sampling operation from a PC
• Calibrate
pump fl ow to a primary standard
• Display the operating mode including Constant Flow or Constant Pressure,
temperature, run time, and battery status
• Create a Pocket Pump program on a PC and upload to the pump for opera-
tion in the fi eld
• Program up to 14 sampling sequences, each with different fl ow rates
• Download pump run time data and history to a PC
• Create chain-of-custody information using the sample set up feature
• Print a history fi le containing pump run time data
• Print a worker exposure profi le containing run time data and the pump’s
history
DataTrac for Pocket Pump System Requirements
• Hard drive with a minimum of 20 MB free disc space
• Available serial port or USB to 9-pin serial adapter compatible with the PC
and system
• Microsoft Windows ® 98 or higher
Accessories