Sonnet Technologies G5 Jive - Manual (Page 5)

5
Figure 16
Figure 15
Figure 14
Figure 13
Installation Steps for Power Mac G5 with PCIe Slots
Install Drives into Computer
1. With its two white connectors at the top, route the supplied
power adapter cable over and in front of the fan/speaker assembly
(Figure 13).
2. Continue routing the connectors through the opening into the
optical drive bay where the optical drive’s power cable is located
(Figure 14).
3. Connect the optical drive’s power cable connector to the G5
Jive’s power adapter cable’s 4-pin female connector; verify the
connectors are plugged in securely (Figure 15).
4. Connect the power adapter cable’s male connector to the opti-
cal drive, and if necessary, reconnect the ribbon cable connector;
verify the connectors are plugged in securely (Figure 16).
PC
Ie
P
ow
er
M
ac
G
5
In
st
al
l
power adapter cable
fan/speaker assembly
power adapter
cable connectors
optical drive
power connector
4-pin female power
adapter cable connector
4-pin male power adapter
cable connector
ribbon cable
connector