Adjust particle sensor – NewAir AP-1008DH User Manual

Page 16

Advertising
background image

15

ADJUST PARTICLE SENSOR

1. With the mood mode button pressed down,

insert the power plug in the electric outlet.

2. With a tone ringing twice, the current sensitivity

indicator of the sensor blinks.

3. Adjust the sensitivity by pressing the speed button.

The sensitivity of the sensor is displayed by

ablinking airflow speed indicator.

4. After adjustment, the sensitivity of the pollution

sensor is set when the power button is pressed to

turn the product off or automatically set when 20

seconds have passed in the setting mode.

How to Adjust the Sensitivity of the Pollution Sensor

When the product is shipped out, the pollution sensor is set to standard sensitivity. If the pollution level

stays at the highest level after 2 hours of operation or stays at the lowest level for more than 1 hour when

the air does not seem clean, users can adjust the sensitivity of the pollution sensor as follows.

Sensitive

Standard

Insensitive

Speed step 1

Speed step 2

Speed step 3

Advertising