Sonnet Technologies xMac mini Server (Revision D and Later) - Manual (Page 13)

Chapter 3 – PCIe Cards, Computer, and xMac mini Server Installation Steps
B – Mac mini Installation Steps
1. Remove the Mac mini from its packaging.
2. Carefully insert the Mac mini under the top edge of the enclosure, push
it against the gasket behind the enclosure’s face plate, and then lower
the computer onto the floor behind the small plastic posts
(Figure 11).
3. Plug all the xMac mini Server’s cables into the back of the Mac mini,
and other cables into PCIe cards as necessary; verify the cables are
plugged in securely (Figure 11).
4. Insert the top cover under the top edge of the enclosure, lower the lid,
and then secure it with the captive thumbscrews (Figure 12).
Figure 11
Figure 12
9