Sonnet Technologies Tempo SATA X4i Serial ATA Host Adapter Card - Manual

Serial ATA Host Adapter for PCI-X
TEMPO
™
SATA
X4i
Quick Start Guide for Tempo SATA X4i
You Should Have
The following item should be included in your product package:
• One Tempo SATA X4i card
• One Serial ATA data cable
The following items may be required (sold separately):
• Medium Phillips screwdriver
• One or more Serial ATA data cables
• Internal drive mounting hardware
• One or more legacy (4-pin) power cable Y-adapters
• One or more legacy to Serial ATA (4-pin to 15-pin) power
cable adapters
• One or more Ultra ATA to Serial ATA adapters (only used to
support parallel ATA drives)
System Requirements
The Tempo SATA X4i requires the following in order to operate in
your system:
• One available PCI-X or PCI slot
• Mac OS
® X Version 10.2.x or later, or Windows ® XP
Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases.
Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com.
Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: [email protected]
Sonnet Technologies, Inc., Irvine, California USA • Tel: 1-949-587-3500 Fax: 1-949-457-6350
©2006 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, and Tempo are trademarks of Sonnet Technologies, Inc. Macintosh and Mac are trademarks of
Apple Computer, Inc., registered in the United States and other countries. Other product names are trademarks of their respective owners. Product specifications subject to change without notice. Printed in the USA.
QS-TSATAII-X4i-E-A-061206
Support Notes: We recommend that you make a backup of important
information on your system’s current hard drive prior to installing new
hardware or software.
When handling computer products, you must take care to prevent components
from being damaged by static electricity. Before opening your computer or
removing parts from their packages, always ground yourself first by touching
a metal part of the computer, such as a port access cover, and work in an area
free of static electricity; avoid carpeted areas. Handle all electronic components
only by their edges, and avoid touching connector traces and component pins.
Also, avoid touching the logic board and any of its components.