Gilderfluke&Co ProDVXF100 - Manual (Page 8)

INSTALL 2.5” HARD DISK DRIVE:
ADD-ON ACCESSORIES:
A keypad (not currently available from maker) can be connected to four External Control
Ports (RJ45 connectors) on the back of player. This keypad is to perform as function
key; when a digit on the keypad is pressed, the player will play the file which is
corresponded to same order number of play list. Key pad can be custom made by
users; the followings are the pin assignment, pin definition, photo of RJ45 connectors &
simple drawing of key pad:
3
- Hard disk drive can only be partitioned in
FAT32 format
- Dismount 4 screws on button of the case
- Remove upper housing & you will see a
main board
- Dismount 3 screws on main board & put
main board aside, you will see USB
board
- Put a 2.5” HDD onto USB board
- Secure 2.5” HDD with 4 pcs of M3x6mm
screws
- Put main board back to where it was &
mount its screws
- Close upper housing and mount its screws
Please note all Western Digital’s 2.5” H.D.D. are not compatible with our player