Hardware setup – Asus A7V266-C User Manual
Page 20
20
ASUS A7V266-C User’s Manual
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
4) Voltage Regulator Output Setting (VID1, VID2, VID3, VID4)
This jumpers allow you to manually adjust the CPU core voltage. It is
recommended to use CPU Default as the CPU core voltage. CPU Default, all
jumpers [2-3], means the Vcore is generated according to the CPU VID
configuration. For each jumper setting, there are two voltage options,
depending on the CPU used.
R
A7V266-C
A7V266-C CPU Core Voltage
Selection
3
2
1
1.85/1.825Volts
VID2
VID3
VID1
VID4
VID2
VID3
VID1
VID4
3
2
1
1.75/1.725Volts
1.7/1.675Volts
1.8/1.775Volts
3
2
1
3
2
1
CPU Default
3
2
1
R
A7V266-C
A7V266-C Keyboard Wake Up
KBWK
Enable
(Default)
1 2
Disable
2 3
5) Keyboard Wake Up (KBWK)
This allows you to disable or enable the keyboard power up function. Set this
jumper to Enable if you wish to use your keyboard (by pressing <Spacebar>) to
power up your computer. This feature requires an ATX power supply that can
supply at least 300mA on the +5VSB lead. The default is set to Enable. (The
computer will not power ON if you set this to Enable but do not have the correct
ATX power supply. NOTE: This jumper must be set in conjunction with Wake
On PS2 KB/PS2 Mouse/CIR in 4.5.1 Power Up Control.