Heco Music Colors Cinema 5.1A User Manual

Page 10

Advertising
background image

HOW TO AVOID DAMAGE TO YOUR VALUABLE SPEAKERS
All HECO loudspeakers are designed and built for optimum sound reproduction with the tone controls in

the central position – i.e. with unaltered or “linear” amplifier output. Higher settings of the tone controls

increase the amount of energy supplied to the loudspeakers. This may lead to speaker damage, at high

volumes.

USE THE VOLUME CONTROL WITH CARE!
If the output of your amplifier is significantly higher than the rated power handling capacity of your

speakers extremely high volumes can physically destroy your speakers. This doesn’t actually happen

often but you should be aware that it is possible.
Weak amplifiers with low output ratings can actually be more dangerous for your speakers at medium

volumes. This sounds strange but the reason is quite simple: Weak amplifiers get overloaded much

faster than powerful ones and this causes measurable and audible distortion, which is more dangerous

for loudspeakers than anything else.
Always turn the volume down

immediately as soon as you hear distortion! If you like listening to loud

music make sure that your amplifier can deliver at least as much power as the speakers’ power-handling

rating.

MAINTENANCE
The lacquered surface is best cleaned with a mild household cleaner. On no account use furniture polish

or similar products on these surfaces. You should not use a microfibre cloth either as this may damage

the surface.

SPECIFICATIONS

Front / Rear

Centre

Configuration:

Two-way Two-way

Power handling capacity RMS / Max.:

60/120 watts

60/120 watts

Impedance:

4 – 8 ohm

4 – 8 ohm

Frequency range:

60 – 32 000 Hz

60 – 32 000 Hz

Cross-over frequency:

3500 Hz

3500 Hz

Recommended amplifier power:

> 15 watts

> 15 watts

Efficiency (2.8 V/1 m):

88 dB

88 dB

Dimensions (WxHxD):

115 x 180 x 128 mm

286 x 115 x 128 mm

Weight:

1.4 kg

2.4 kg

Subwoofer

Configuration:

bass reflex, downfire

Output power RMS/Max.:

60/120 watts

Frequency range:

30 – 250 Hz

Cross-over frequency:

100 Hz (SUB), 250 Hz (LFE)

Dimensions (WxHxD):

250 x 388 x 383 mm

Weight:

10.7 kg

Accessories:

mains cable

SUBJECT TO TECHNICAL CHANGE

10

GB

Advertising