IDEC DATAVS1 Series User Manual
Page 26
Instruction Manual
SVS1 Series
21
• Failure
(%)
% of failed inspections of the total
number executed
It is now possible to modify the view
scale for the graph below using the
RIGHT/LEFT ARROW
buttons. In
particular:
The graph is compressed along the x-
axis using a factor of 10.
The graph is compressed along the x-
axis using a factor of 100.
Press SET to exit the statistics mode.
If the results of the defined inspection are not as desired, it is possible to press the ESC button to
return to the previous configuration step. Press once to return to the Adjust menu, press twice to
return to the Setup menu.
When you are satisfied with the results, proceed to the fourth and final configuration step by pressing
the STATUS button: The Monitor LED switches off and the System LED lights up.