Ip ospf auto-vlink-create, Command mode, Description – Avaya P580 User Manual
Page 390: Syntax, Sample output, Systems, Ip ospf auto-vlink-create -14
Advertising
Chapter 19
19-14
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip ospf auto-vlink-create
Command Mode
Global Configuration.
Description
Enables the automatic creation of virtual links. Use the no form of this
command to disable this behavior.
Syntax
Sample Output
The following command enables the automatic creation of virtual links.
(config-if:intf3)#
ip ospf auto-vlink-create
Systems
P550R, P580, P880, and P882.
To Enable:
ip ospf auto-vlink-create
To Disable:
[no] ip ospf auto-vlink-create
Advertising
This manual is related to the following products: