Avaya P580 - Manual (Page 69)

Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1 4-1
4 Buffering
Overview
This chapter describes the following commands:
■
set buffering fabric-port (age-timer)
■
set buffering fabric-port (hipri-alloc)
■
set buffering fabric-port (hipri-service-ratio)
■
set buffering fabric-port (pri-threshold)
■
set buffering port (age-timer)
■
set buffering port (hipri-alloc)
■
set buffering port (hipri-service-ratio)
■
set buffering port (pri-threshold)
■
show buffering fabric-port
■
show buffering port
* Note: These commands are not supported on 80-Series modules.