Snmp-server community, Command mode, Description – Avaya P580 User Manual
Page 542: Syntax, Systems, Snmp-server community -4
Chapter 25
25-4
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
snmp-server community
Command Mode
Global Configuration.
Description
Creates or modifies a community string to access the switch. The no
command deletes the community string.
Syntax
Systems
P580 and P882.
To Configure:
snmp-server community <community-string> {group
<groupname> [<ip-addr> [notify]]
To Delete:
no snmp-server community <community-string> [<ip-
address>]
Table 25-2. Parameters, Keywords, Arguments
Field
Definition
<community-
string>
The name of the community string. The community
string can range from 1 to 26 characters.
Do not assign a community string and SNMPv3 user the
same name.
<groupname>
Name of the group to which you are assigning the
community string.
Important:
Do not assign the community string to a
group that requires authentication or
encryption. Community strings do not
support authentication or encryption.
<ip-addr>
The IP address from which the community string is
valid. Trap messages are sent to this IP address if you
enter the notify option.
[notify]
Sends trap messages to the IP address that you specify.