Foredom P-DP30 User Manual

Foredom, P-dp30, Owner’s manual

Advertising
background image

LIMITED WARRANTY

The Foredom Electric Company warrants the P-DP30 Drill Press to be free of defects in
material or workmanship for a period of one year after purchase. During the warranty
period, the defective product will be repaired or replaced without charge or, at our option,
the purchase price will be refunded. This warranty does not cover damage caused in transit
or by accident, misuse, or ordinary wear.
ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OF FITNESS
AND MERCHANTABILITY, ARE HEREBY LIMITED IN DURATION TO A PERIOD ENDING ONE
YEAR FROM DATE OF PURCHASE, AND WE WILL NOT BE LIABLE OR RESPONSIBLE FOR
ANY SPECIAL OR CONSEQUENTIAL DAMAGES.

Repair or replacement will be made at our option if the product is returned
post-paid to:

The Foredom Electric Company

16 Stony Hill Road

Bethel, CT USA 06801

All warranty repairs must be done at the factory at the above address. We will not pay any shipping or

transportation charges. This warranty only covers the original purchaser of the product. Some states

do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply

to you. This warranty gives you specific legal rights, and you may also have other rights which vary

from state to state.

FOREDOM

®

Form 1242 n 12/09

Printed in USA

The Foredom Electric Company

Bethel, CT USA 06801

www.foredom.com

For More Information

For more information on Foredom machines,

handpieces, and accessories, contact your

local dealer. When no local dealer is available,

visit www.foredom.com on the web.

The Foredom Electric Company

16 Stony Hill Road, Bethel, CT 06801

Tel.: 203-792-8622

Fax: 203-796-7861

Optional Accessories
for the P-DP30 Drill Press:

Micro Chuck (A-MC2) – An accurate,

economical adapter chuck, used for 60 to 80

wire gauge drills. The A-MC2 can be held in

any 1/8

″ or 3/16″ collet.

Hardened Tool Steel Step Drills – Drill point

sizes from .5mm (#76) to 2.3mm (#43).

Refer to the Foredom Accessory Catalog for

a complete listing of sizes. All have 3/ 32

diameter shanks.

Chuck Key Handle (HPCK-0) – For H.30

®

,

H.25C and H.30H Handpieces. Comes with

#0 chuck key in handle.

For Your Own Safety:

Always wear eye protection.

Read this Owner’s Manual

before operating your

Foredom tool.

®

P-DP30

Drill Press

Owner’s

Manual

FOREDOM

®

Advertising