Inter-M RM-911D - Manual (Page 17)

RM-911D/W(REMOTE MICROPHONE)
OperationMethod
■ ■
SETTING pASSWORD
Connect to the ARM-911 network using the IP
address of the ARM-911. Move to the RM
password menu among the Administrator Menu.
Input the password for the RM1, RM2, RM3, and
RM4 respectively. Select SET button.
To use password, select the
111111 box. To not
use the password, do not select the 111111 box.
■ ■
INSTANT plAy AT RM-911D/W
Press the password and then press the button to
play the message. The LED of the button is lit and
the message is played. If password is not correct or
not inputted, then the IN-USE LEDs are blinking and
the button does not lit and does not play the
message.
If ARM-911 or RM-911D/W plays the one of 10
messages, then the corresponded button is lit. If the
button which is lit is pressed in the one of 4 Remote
Microphone