Inter-M ECS-6216S - Manual (Page 9)

1. FIRE SENSOR or TRIGGER CONTACT INPUT TERMINAL
It is the terminal connected to the sensor output of the fire receiving panel or external trigger contact
and sends the emergency, evacuation broadcasting or Emergency Messaging to the zone.
1) Using the MACRO function, selection and grouping of multiple broadcast zones can be
assigned for each input channel.
However, this function can be only be configured using the Windows program. The setting
information is downloaded from PC to PX-6216 and saves in an internal memory.
(Refer to System Operation Manual)
2) A maximum 160 zones can be selected and saved in one input channel.
3) For example, if you select and memory the zone 1, 2 and 3 to channel NO.1, emergency
broadcasting will be transmitted to zone 1, 2 and 3 at the same time when a fire sensor is
received on channel NO.1.
2. PD, COM TERMINAL
1) PD Contact Point Output Terminal
This is the contact output terminal used for controlling the operations of the power distributor.
Contact point will be transmitted when one speaker zone is ON or on fire sensor input.
It is connected to REMOTE SW terminal of the power distributor.
2) Com Terminal
It is connected to COM terminal of fire receiving panel.
3. LINK IN/OUT TERMINAL
LINK IN terminal is connected to previous equipment and LINK OUT terminal is connected to next
equipment.