Inter-M HDMC-01 - Manual (Page 6)

7
CONVERTER INSTALLATION
Connection Overview
Starting Installation
The Converter most be installed by several condition.
- HD-SDI Camera / HDMI Input Monitor or TV / 75Ω BNC & HDMI Cable
a. Select an appropriate location for the camera.
b. Install camera to be connected (75Ω BNC Cable) to the converter.
c. Install Converter to be connected( HDMI Cable) to the HD Monitor.
d. Plug the dc power into the Converter DC INPUT Jake.
e. The converter LED is lit when the HD-SDI signal is IN
F. The camera viewing area should be displayed on the monitor Screen.
* NOTES
- Use Monitor for FULL HD monitor or TV.(1920x1080 Resolution)
HD-SDI
through
Coaxial Cable
RS-485
HDMI Cable
HD-SDI DVR
or
HD-SDI Monitor