Inter-M HDMS-0808 - Manual (Page 11)

VIDEO AUDIO MATRIX SWITCHER
9 HDMS-0808
How to connect How to connect
- Way to turn on the power
1. Connect the DC adaptor in the matrix switcher package box to the DC input terminal at the rear of
matrix switcher.
Connect DC jack to DC 12V/3A input and turn on the power switch on the front side of matrix switcher.
2. If they are connected correctly, green light on the power switch button will be on.
- Way to operate the control switch on the front
1. Select output
Select output by pushing output button No. 1~8 on the front. For example, if No.1 output is selected,
push output No. 1 on the front. At this time, No.1 display window at the left side of the front will blink
for 10 seconds to standby for the input. With same method, user can select anything among No. 1~8 in
the output side. This button is connected to the output terminal on the back.
2. Select input
Select input by pushing input button No. 1~8 on the front. For example, if No.1 input is selected to the
output side, push No.1 output first, and then select the input No.1 when display window No.1 on the left
blinks.
Blinking of No.1 on display window stops and then INPUT No.1 is selected.
With same method, user can select anything among No. 1~8 in the input side. This button is connected
to the input terminal on the back.
3. Select video
As same methods in above 1, Select output and 2. Select input, user can control video signal separately
by pushing the video button on the front. When video button on the front is pushed, green light on the
video button will be on.
4. Select audio
As same methods in above 1, Select output and 2. Select input, user can control audio signal separately
by pushing the audio button on the front. When audio button on the front is pushed, green light on the
audio button will be on.