Inter-M DPA-230DC - Manual (Page 11)

1CH/2CH DIGITAL POWER AMPLIFIER
9 DPA-130DC/230DC
Volume Range Setting Volume Range Setting
The volume control range can be set both 0dB ~ -12dB and 0dB ~ minimum by changing the volume range
setting internally. The factory default setting is 0dB ~ minimum.
NOTE
: Service personnel only.
1. Volume Range: 0dB ~ minimum (factory default)
2. Volume Range: 0dB ~ -12dB
To change the volume range from 0dB ~ minimum to 0dB ~ -12dB, pull out the connector connected to the
CP207.
VR200
C
P
2
0
7
VR200
C
P
2
0
7
pull out