Rear panel, Reference amplifier – Inter-M R150PLUS User Manual

Page 8

Advertising
background image

6

R150 PLUS/300 PLUS/500 PLUS

REFERENCE AMPLIFIER

Rear Panel

Rear Panel

1. BALANCED INPUT CONNECTORS

Each input channel is equipped with a 1/4" TRS and an XLR connector. Standard rules of interconnect apply.

2. MODE SELECTOR SWITCH

Move this switch to select either the STEREO or BRIDGED MONO position as needed for the application.

The Stereo mode is most common. Channel 1 input feeds the channel 1 output. The channel 2 input feeds the
channel 2 output.

The Bridge Mono mode combines both channels to create one larger mono channel. Input signal applied to
channel 1 will be available across the positive terminals of Channel 1 and channel 2. Do not connect the
channel 2 input or any of the negative outputs.

3. OUTPUT CONNECTORS

Binding Posts and Locking speaker connectors are provided. Bridged Mono operation requires a different
method of connecting the cables than Stereo operation. Be sure than the amplifier is in the correct mode
before connecting the speaker load.

4. FUSE

The fuse protects the amplifier by opening the circuit for the AC mains power in case of overload or
malfunction. If the fuse opens, the amplifier (and the various other components in the system) should be checked
for proper operation. If the fuse continues to open after verifying that the system is wired correctly and that an
overload has not occurred, the amplifier should be checked for proper operation by a service technician.

5. AC INPUT

Connect this product to an appropriate AC power source using the supplied Universal AC Power Cord.

www.inter-m.com

AMP MODE

RISQUE DE CHOC

ELECTRIQUE NE PAS

OUVRIR.

AVIS

S N

~

AC INPUT: 230V 50Hz,480W

FUSE: T5AL/250V

TO REDUCE THE RISK

OF ELECTRIC SHOCK,

DO NOT REMOVE COVER.

NO USER SERVICEABLE

PARTS INSIDE. REFER

SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

CAUTION

TO REDUCE THE RISK OF

FIRE REPLACE ONLY WITH

SAME TYPE FUSE.

UTILISER UN FUSIBLE

DE RECHANGE DE

MEME TYPE.

CHANNEL 1

INPUT

BALANCED

0dBm

CHANNEL 2

BALANCED

0dBm

INPUT

OUTPUT

CHANNEL 1

CHANNEL 2

(4

~

8 )

(4

~

8 )

(4

~

8 )

(4

~

8 )

BRIDGED

STEREO

REFERENCE AMPLIFIER

OC03

RATED OUTPUT 250W/CH @4

Ω STEREO

RATED OUTPUT 500W @8

Ω BRIDGED MONO

BRIDGED

MONO

(8 ~16 )

MODEL NO. R500 PLUS

1

2

3

4

5

Advertising
This manual is related to the following products: