Zanussi FA 1032 - Manual (Page 10)

10
Use
1. Programme chart
It will help you to choose the most suitable washing
programme for your laundry.
2. Spin speed selector
This dial has the following positions:
•
0
= no spin for cotton
• 300 = MIN, for cotton
• 1050 = MAX, for cotton.
For synthetics, delicates and wool the maximum
position corresponds to 750 rpm.
The intermediate positions refer to spin speed values
for cotton.
3. RINSE HOLD button
(Easy iron. If you use this button it will be easier to
iron the fabrics later).
Pressing this button the water will hold up in the
wash tub at the end of the cycle. Press again to drain
the water and take out the clothes.
4. button
Pressing this button before starting the intense
program there will be one rinse less which leads to
energy and water saving.
5. On/off lamp
It lights when the appliance is operating.
6. Temperature selector
This control allows you to select the temperature of
the washing cycle in accordance with the kind of
clothes to be washed.
Turn the control until the required temperature
coincides with the marker.
On the program table you will find the most apropriate
temperature for each kind of washing. Selecting
any program can be run through with cold water. This
will ensure a saving in electricity consumption.
7. Program selector
To select the required program turn the control
clockwise until the marker on the top coincides with
the letter of the required program (reference mark on
the control panel). If at any chance you pass by the
required letter NEVER TURN THE CONTROL
ANTICLOCKWISE just continue clockwise until the
required letter is reached again.
Control panel
90
°
80
°
70 ° 60 ° 50 ° 40
° 30
°
C
D
F G H J
K
L
M
N P A B
1 2 3 4 6 7 5