ION Audio Jukebox Bluetooth - Manual (Page 4)

4
Routing Your Charging Cable
On the bottom of Jukebox Bluetooth, route your charge cable through
the cable channel clips to the pass-through slot.
Front Panel
1. CRADLE
RELEASE* – When this lever is pressed down,
the music device will lean forward, allowing you to easily
grasp and pull up the music device, removing it from the
cradle.
2. CRADLE – To rest your music device on Jukebox
Bluetooth, place it into the device holder.
3. SPEAKERS – Plays back the audio from your music
device. Select from your music library or favorite jukebox app (works with most jukebox apps)
Rear Panel
1. POWER INPUT – Use the included power adapter (12V DC, 3A,
center pin-positive) to connect Jukebox Bluetooth to wall power.
2. LINE IN – This stereo 1/8” line-level input can be used to connect a
CD player, MP3 player, or other audio source. To adjust the volume of
the audio signal, adjust the output volume of your audio source.
3. POWER – Press this button to turn Jukebox Bluetooth on or off.
4. USB CHARGER – Connect a USB cable here to charge your USB
devices, such as MP3 players, smartphones, etc.
*Note: To ensure safe removal of your
music device, gently press the CRADLE
RELEASE down and securely grasp the
music device when it leans forward from
the cradle.
2
3 3
1
DC 12V
1
LINE IN
2
WER
ON
OFF
3
4