ION Audio Retro Rocker - Manual (Page 4)

4
FRONT PANEL
1. DOCK RELEASE* – When this lever is
pressed down, the iOS device will lean
forward, allowing you to easily grasp and pull
up the iOS device, removing it from the dock.
2. DOCK – To connect your iOS device to
RETRO ROCKER, gently slide it onto the
30-pin connector here.
3. SPEAKERS – Plays back the audio from
your iOS device. Select from your iTunes
library or favorite jukebox app (works with
most jukebox apps).
REAR PANEL
1. POWER – Use the included power adapter (12V DC, 3A, center pin-
positive) to connect RETRO ROCKER to wall power.
2. LINE IN – This stereo 1/8” line-level input can be used to connect a
CD player, MP3 player, or other audio source. To adjust the volume
of the audio signal, adjust the output volume of your audio source.
3. POWER BUTTON – Press this button to turn RETRO ROCKER on
or off.
*Note: To ensure safe removal of your
iOS device, gently press the DOCK
RELEASE down and securely grasp the
iOS device when it leans forward from the
dock.
LINE IN DC 12V
1 2
MAIN POWER ON
OFF
3
2
3 3
1