ION Audio Film 2 SD (Silver) - Manual (Page 5)

3
QUICKSTART
1.
Connect FILM2SD to a power outlet with the included power adapter.
2. Turn on the FILM2SD with the POWER button.
3. Place your slide(s) or negative into the appropriate holder.
4. Insert the holder into the FILM HOLDER SLOT.
5. Insert your SD card into the SD CARD SLOT. When you save your scanned images, they
will be stored on the SD card.
6. Capture your image by pressing the OK button.
7. Press the OK button again to save the image.
8. Now you can remove the SD card and insert it into an SD-compatible device, such as a
digital picture frame, computer or television, to view your pictures.
If you want to transfer your image(s) directly to your computer from FILM2SD, connect
FILM2SD to your computer with the included USB cable and select the USB icon (USB
Mode) from the Main Menu to establish the connection. Once the connection has been
established, you can copy the images to your computer by dragging the image files to
your hard drive.
Note: While FILM2SD is in USB Mode, you will not be able to scan other pictures. To
enable scanning again, remove the USB cable, turn off FILM2SD, then turn it on again.