IPA Tools 9000 Pulsar Standard Kit - Manual (Page 15)

14
a. Choose the supplied Battery Clip Adapter or the #9031 Bench
Test/Voltage Probe Adapter (Optional).
b. Connect in line with the PULSAR ™ and connect to the circuit.
c. Select Manual Mode (See Section 7)
d. Select the desired amperage limit for the equipment to be tested.
e. Send power while viewing the current draw. This allows you to inspect
and test your equipment while preventing damage and avoiding
guesswork. All functions such as Current Limiting, Peak Hold and
Amperage Reading works with the Battery Clip and Bench Test/Voltage
Probe Adapters.
NOTE: The #9031 Bench Test/ Voltage Probe Adapter (Optional) can be
used in applications up to 20 AMP.
17. BY-PASSING RELAYS WITH THE PULSAR ™ :
The PULSAR ™ may be connected in place of an automotive relay. In this
situation, the PULSAR ™ is used to send power into the relay circuit limited to the
users setting. When performing in Manual mode, the Manual push button is
used to send power into the circuit while viewing current draw. In this operation,
the user verifies proper operation of the power supplied into the circuit and the
circuit after the relay. The user confirms whether or not the problem is caused
by the relay, circuit, or relay wiring configuration
.
a. Select Manual or Automatic Mode.
b. Choose the appropriate adapter, i.e. Probe or Maxi Adapter.
c. Remove the relay from the circuit to be tested.
d. Install the adapter in place of the relay.
e. Set the amperage limit and begin sending power.
NOTE TO USER: When bypassing a relay or fuse, you must first verify the
proper amperage for the circuit to be tested. Do not exceed the
manufacturer specifications for amperage draw. The PULSAR
™
manufacturer and distributor are not liable for damage occurring to
components and circuits being tested by the PULSAR
™ . It is up to the
user to ensure the tool is used properly.
ADDITIONAL OPTIONS:
(INCLUDED IN #9001 MASTER KIT)
#9030 FIVE PIECE FUSE BOX
ADAPTERS SET (FLF, FLS, JCase,
MAXI, Female Maxi, screw-on style
PAL, European ceramic and all glass
style fuses)
#9031 BENCH TEST/VOLTAGE
PROBE ADAPTER