Jackco Model 65300 User Manual
Page 3
PRIOR TO OPERATION
1.Insert the handle into the socket and secure it with the set screw provided.
2.Turn the handle counterclockwise until release valve is open, pump the jack several
times to purge the accumulated air in the system.
3.Turn the handle clockwise to close the release valve. The jack is now ready to use.
Turn the handle clockwise.
Move the handle up and down. Use the full stroke of the piston for
greater speed.
Support the vehicle with appropriate jack stands.
To Lower a vehicle:
Lift the vehicle to remove the jack stands, ensuring that there are
no persons or obstructions under the vehicle. Turn the handle
counter-clockwise.
SPECIFICATION
Capacity:
3 tons
Chassis Width:
13 in
Min Height :
3.75 in
Saddle Diameter : 4.52 in
Max Height :
18.1 in
Net Weight :
58 lbs
Length:
26.4 in
To Lift a Vehicle:
To Purge Air
OPERATING INSTRUCTION
Air may become trapped in the hydraulic system during transit.
3