Joyce BG450D - Manual (Page 2)

2
Table of Contents
Section I – General Information
1-1 Contact Joyce Dayton .....................................................2
1-2 Purpose and Scope .........................................................2
1-3 Receipt of Product ...........................................................2
1-4 Warranty ............................................................................3
1-5 Precautions for Use .........................................................3
1-6 General Installation Instructions ...................................3
Section II – Maintenance
2-1 Lubrication ........................................................................4
2-2 Repair Parts.......................................................................4
2-3 Sizing BG 450 Bevel Gear Jacks ...................................5
Section III – Views and parts lists
3-1 BG 450 Bevel Gear Jack Drawing..................................6
3-2 BG 450 Bevel Gear Jack Parts List ...............................7
3-3 BG 450 Bevel Gear Jack Part Numbers........................8
3-4 Maintenance Check ........................................................9
3-5 Maintenance Log..............................................................9
3-6 Joyce Dayton Serial Number Tag .................................10
Section I
General Information
1-1 Contact Joyce/Dayton Corp
Joyce/Dayton Corp.
P.O. Box 1630
Dayton, OH 45401
(800) 523-5204 (US and Canada only)
(937) 294-6261
(937) 297-7173 Fax
Email: [email protected]
Website: www.joycedayton.com
1-2 Purpose and Scope
This manual provides installation, operation and maintenance instruction for the standard
Joyce/Dayton bevel gear jacks (BG450). Although this manual covers the standard bevel gear
jacks, some may vary significantly from this manual. For special units not covered please contact
Joyce/Dayton Corp. for assistance.
1-3 Receipt of Product
All equipment should be immediately inspected upon receipt for any damage and to verify correct
product and quantities. Any problems should be reported to Joyce/Dayton Corp. and the freight
carrier as soon as possible. Products returned without a Return Goods Authorization (RGA) will
not be accepted.