Avenview SW-HDM3D-C5-8X8 - Manual (Page 18)

www.avenview.com 18
Fast Select Button:
Press Fast select button. Quick setting.
Input one  Output Port one
Input two Output Port two
…..
Press Fast select pull down menu.
Select Input Num-Output Num
Input source #1  Output port #1
Input source #2  Output port #2
…..
Select Input* - All Output
Send the same source to all output.
Output Port:
Pull down menu and select which source to be sent to this output port.
One by one setting
On main menu screen.
First select input source. Then select the output ports which you want to
send the video and audio from this source. When you select the input
source, the source will change to gray. When you select the output port
one by one, the selected output port will change to gray.
The linking line will change to yellow.
Group setting
First select output ports one by one. Then select the input source. The selected output ports change
the setting at the same time.
By using Terminal:
Baud rate: 9600
Data length: 8bit
Parity check: No
Stop bit: 1