DMC ATP/AST Series - Manual (Page 6)

DER-S0087A 6 Rev. 13©1999 - 2013 DMC Co., Ltd.
ATP/AST Series Product Specifications
2-4. Electrical Characteristics
§ Terminal Resistance Test
Condition: Top and bottom electrodes are measured at the terminal.
Judgement: Must satisfy the specification.
§ Insulation Resistance Test
Neighboring Terminals: Measured by applying the reference voltage to the terminals
Active Area Electrodes: Measured by applying the reference voltage to the top and bottom electrodes.
Judgement: Must satisfy the specification.
2-5. Appearance
§ Appearance Test
Condition: Tested by an examiner with over 1.0 eyesight at 30cm away from the product under the
transmittable light at over 60° the surface of the product.
Judgement: Must satisfy the specification.