LevelOne FCS-3091 - Manual (Page 37)

FCS-3091 User’s Manual
36
36
Event Configuration
1. To add an event trigger, click on [Add] and setup panel will be expanded.
2. Give a name to this event.
3. Set the time interval between each trigger.
4. Set the time period for the trigger. Choose “Always” or “During time between” or “Never”.
5. The trigger condition is Motion Detection.
The responding actions can be “Upload images” and “Activate Output Port” and
“Send Email Notification” and “Send HTTP Notification to” and “Send
Message Notification (TCP)”.
6. Click on [Save] to save the configuration made.
1
2
3
4
5
6