LevelOne NVR-0104 - Manual (Page 101)

NVR-0104 User Manual 101
Event Triggers
We have finished defining how an event will be triggered and which
servers will be receiving notifications in the previous two sections, now
we can finish up the event configuration by setting:
• Which channels will have event trigger function enabled
• What is considered to be an event
• Where the warnings will be sent to and how they will be sent
Use the checkbox to enable event trigger on the desired channels.
*Once motion detection is enabled in this page, please configure the
motion area and enable motion detection in the corresponding
channels (cameras) from camera's own web UI. The NVR only detects
the first motion area set in the camera. The NVR recognizes the first
motion area by its ID number set in the camera.