LevelOne FCS-7111 - Manual (Page 88)

88 - User's Manual
HTTP: Select to send the media fi les to an HTTP server when a trigger is activated.
■ URL: Enter the URL of the HTTP server.
■ User name: Enter the user name if necessary.
■ Password: Enter the password if necessary.
To verify if the HTTP settings are correctly confi gured, click Test. The result will be shown in a pop-up
window as below. If successful, you will receive a test.txt fi le on the HTTP server.
Click Save to enable the settings, then click Close to exit the page.
Network storage: Select to send the media fi les to a network storage location when a trigger is activated.
Please refer to Network Storage Setting on page 83 for details.
Click Save to enable the settings, then click Close to exit the page.
When completed, the new server settings will automatically be displayed on the Event Settings page.
For example: