LevelOne WBR-6022 - Manual (Page 9)

7
3 Hardware Installation
Front View
WLAN Button  Press and hold for 3 seconds to turn the Wireless LAN on or off.
 Please confirm WLAN status as indicated by WLAN Light
Status Light  A steady blinking light indicates the device is ready
WAN Light  A solid light indicates the WAN port is connected.
WLAN Light  Off indicates Wireless LAN is turned off, or no wireless client is
connected to the router.
 LED blinks during wireless data transmission, or when there is a
wireless client connected to the router.
 Fast and steady blinking indicates WPS function is activated and the
router is pairing with wireless client.
LAN Lights  A solid light indicates to an Ethernet enable computer on ports 1 ~ 4.
 LED blinks during data transmission.
Sleep Light  When solid light (orange) means that the router is in sleep mode.
WPS Button  Wi-Fi Protected Setup push button. Press to activate WPS pairing with
wireless client.
Reset (WLAN and
WPS Buttons)  Press the WLAN and WPS buttons together for 5 seconds to reboot
and restore the device to factory default settings.