LevelOne WBR-6803 - Manual (Page 45)

45
3.4.1 System Log
This page support two methods to export system logs to specific destination by means of
syslog (UDP) and SMTP(TCP). The items you have to setup including:
1. IP Address for Sys log: Host IP of destination where sys log will be sent to. Check
Enable to enable this function.
2. E-mail Alert Enable: Check if you want to enable Email alert (send syslog via email).
3. SMTP Server IP and Port: Input the SMTP server IP and port, which are connected with
':'. If you do not specify port number, the default value is 25.
For example, "mail.your_url.com" or "192.168.1.100:26".
4. Send E-mail alert to: The recipients who will receive these logs, you can assign more
than 1 recipient, using ';' or ',' to separate these email addresses.
5. E-mail Subject: The subject of email alert, this setting is optional.
Click on “Save” to store your settings or click “Undo” to give up the changes.
3.4.2 Dynamic DNS
To host your server on a changing IP address, you have to use dynamic domain name service
(DDNS). So that anyone wishing to reach your host only needs to know the name of it.
Dynamic DNS will map the name of your host to your current IP address, which changes each
time you connect your Internet service provider.
Before you enable Dynamic DNS, you need to register an account on one of these Dynamic