LevelOne WUA-0605 - Manual (Page 16)

13
3.5. Statistics
The Statistics tab display the stat. value of current wireless connection Tx and Rx, you can click
Reset button to reset value and restart to count.
3.6. Wi-Fi Protect Setup
Wi-Fi Protect Setup (WPS) function can let you create a safety network easily. You can through
‘PIN Input Config (PIN)’ or ’Push Button (PBC)’to encrypt your network. This USB adapter also
provides WPS button, you only need to push the WPS button in this USB adapter and the router which
support WPS function, then the router will be encrypted to WPA2-AES mode automatically.
Note:
► The status of WPS in the router must be enabled
► If you have configured encryption mode in your router, then when you use this WPS function,
please configure encryption mode to NONE, then it will be encrypted to WPA2-AES mode
automatically. If you don’t want to change your encryption mode, then when you use this function, the
router will be encrypted to the mode that you have configured.