LevelOne FGP-1000 - Manual (Page 3)

3
4. Technical Specifications
Standards
IEEE 802.3/u 10/100/1000BaseT/TX
IEEE 802.3x Flow Control
IEEE 802.3at/af PoE compliant
midspan PoE compliant
Features
MAC Address: 8K
Buffer Memory: 512KB
Transmission Method: Store and Forward
Filtering/Forwarding Rates
1000Mbps port
– 1,488,000pps
100Mbps port - 148,800pps
10Mbps port - 14,880pps
Transmission Media
10BaseT Cat. 3, 4, 5 UTP
100/1000BaseTX Cat. 5 UTP/SFP
PoE on each Port 15.4W/30W
Output PoE Pin 4, 5, 7, 8
LED Indicators
Port 1~8: 10/100M, PoE ON/OFF
Power, Port 9,10: 10/100/1000M
Power Adaptor
Input: 100-240VAC, 50~60Hz
Output: 52VDC 2.3A (120W)
Dimensions 188 Ч 118 Ч 38 mm (L x W x H)
Weight 1.5 kg
Operating Temperature 0 to 50℃
Humidity 10 to 90% RH (non-condensing)
Certifications FCC Class A, CE
5. LED Indicators
On the front panel of 8-Port FE PoE + 2-Port GE Switch, there are 19 LED indicators as the following;
POWER:
“ Green On ” indicates power is on and normal.
Port 1~8 LAN:
“ Green On ” indicates each Ethernet LAN port is in connection.
GbE Port 9, 10: “ Green On ” indicates Gigabit LAN port is in connection.
“
Yellow On
” indicates Fast Ethernet LAN port is in connection.
PoE:
“
Green On
” indicates Power over Ethernet function is enabled for each port.
“OFF” indicates the PoE is disabled, and it becomes a regular LAN port.
6. Dip Switch Settings vs Power over Ethernet
Note that the dip switches can be switched ON and OFF anytime. However, it is
suggested that the dip switches be set ready before the PoE port is connected for
power management.
The device will be re-started if the overall PoE power consumption is over the
power budget. Please make less PoE ports enabled when over the power budget.
1 ~ 8 ports DIP ON
Per PoE Port 15.4W/30 Watts Injected
Maximum PoE Power 115 Watts